Click image to view full size image
Cixi Hongye Sealing And Packing Co.,Ltd is one of the leading China oval ring joint gasket manufacturers and suppliers with one of the famous brands, as a professional company our factory is able to produce low price oval ring joint gasket with high quality. Welcome to buy discount and cheap products from us.
API ring Joint gaskets come in two basic types, an oval cross section and an octagonal cross section. These basic shapes are used in pressures up to 10,000 psi. The dimensions are standardized and require specially grooved flanges. The octagonal cross section has a higher sealing efficiency than the oval and would be the preferred gasket. However, only the oval cross section can be used in the old type round bottom groove. The newer flat bottom groove design will accept either the oval or the octagonal cross section. The sealing surfaces on the ring joint grooves must be smoothly finished to 63 micro inches and to be free of objectionable ridges, tool or chatter marks. They seal by an initial line contact or a edging action as the compressive forces are applied.
The hardness of the ring should always be less than the hardness of the flanges to prevent flange deformation. Dimensions for API ring joint gaskets and grooves are covered in ASME B16.20 and API6A
THE MAIN TECHNICAL PARAMETERS FOR RTJ GASKET:
E-mail: 